Level 3 Engineering Technician Apprenticeship Standard: Mechatronics Maintenance Technician Pathway
Type: Full Time
Subject: Engineering and Motor Vehicle
Start Date: Please contact the Information Centre for start date information
Fee: Please contact the Information Centre for fee information
42 months – additional time may be required to complete your independent End–Point assessment. You must have a contract of employment for the duration of your Apprenticeship programme.
This is a Level 3 Apprenticeship and is equivalent to A–Levels. Please note you will be working to A–Level standard for Maths and Science.
You may choose to progress onto a Higher/Degree Level Apprenticeships, you could also apply for full–time study at university.
Who is it for
APPLICATIONS FOR 2020/21 NOW OPEN!
Please only apply for this course if you already have a suitable employer to support you throughout your Apprenticeship. If you do not currently have an employer you can apply for Apprenticeship vacancies by visiting www.peterborough.ac.uk/apprenticeships/apprenticeship–vacancies
Do you enjoying solving problems in order to fix things?
Have you got a talent for keeping things working smoothly?
Mechatronics Maintenance Technicians ensure that plant and equipment perform to the required standard to facilitate production targets regarding Safety, Quality, Delivery and Cost within High Value Manufacturing environments. Typically the work would cover a broad range of activities include installation, testing, fault finding and the on–going planned maintenance of complex automated equipment.
As an Apprentice you will be responsible for the quality of their own work, possibly others' and ensuring the work is completed safely, meets stakeholder quality, time and budget requirements, whilst maintaining the efficient running of plant and equipment.
Apprentice can follow two separate pathways; Electro/Mechanical Bias or Electrical Bias from year 2 depending on your role and desired specialist outcome.
Other specialist pathways are also available at Peterborough Regional College these include: Machinist; Product Design and Development Technician; Toolmaker and Tool and Die Maintenance Technician; Technical Support Technician, visit our course guide to find out more.
This pathway is also similar to the Level 3 Food and Drink Maintenance Apprenticeship Standard also available at Peterborough Regional College. If you are wanting to be working in the food and drink industry this maybe an interest to you as an alternative Apprenticeship. You can find out more information by visiting www.peterborough.ac.uk/course/WB3FDMA0A/level–3–food–and–drink–maintenance–apprenticeship–standard
You can apply for an Apprenticeship if you are living in England, over 16 and not in full–time education. You must be in paid employment for the duration of your Apprenticeship, you cannot be self–employed or a volunteer. Employers must pay you the minimum Apprenticeship wage or more, for a minimum of 30 hours a week.
Interview Skills Assessment
All candidates will be invited to a pre interview with the Apprenticeship Recruitment Officers and will take part in an initial assessment for English and Maths. You may also be required to complete an aptitude test to assess your current skills.
We strongly recommend all candidates also complete a minimum of 2 weeks of work experience with their employer before to the start of the Apprenticeship to ensure the organisation meets your needs.
What will I need
Individual employers will set their selection criteria, but it is likely to include 5 GCSEs at grade C/4 or above including English, Maths and Science or a Technology subject; a relevant Level 2 Apprenticeship; other relevant qualifications and experience; or an aptitude test with a focus on your current skills.
This course is a hands on approach to learning so you will need to have a passion and drive for engineering as well as the ability to perform academically at A Level standard for Maths and Science.
You will also require a suitably supportive employer who will guide you through your Apprenticeship. If you do not have an employer already you can apply for Apprenticeship vacancies are advertised on our website – https://www.peterborough.ac.uk/apprenticeships/apprenticeship–vacancies/
We strongly advise you to complete a minimum of 2 weeks work experience with your employer before to the start of your Apprenticeship to ensure it is a suitable organisation for your needs. You need to be prepared to get your hands dirty.
What is covered
On this Apprentice you will learn core skills, knowledge and behaviours required for an Engineering Technicians, as well as specialist skills and knowledge that are require for your chosen pathway.
Core skills, knowledge and behaviours include:
• Understanding the importance of complying with statutory, quality, organisational and health and safety regulations
• Understanding the general engineering/manufacturing mathematical and scientific principles, methods, techniques, graphical expressions, symbols formulae and calculations used by engineering technicians
• Understanding the structure, properties and characteristics of common materials used in the sector.
• Understanding the typical problems that may arise within your normal work activities/environment
• Understanding approved diagnostic methods and techniques used to help solve engineering/manufacturing problems
• Understanding the important of only using current approved processes, procedures, documentation and the potential implications for the organisation if this is not adhered to
• Understanding and interpreting relevant engineering/manufacturing data and documentation in order to complete your job role.
• Understanding the different roles and functions in the organisation and how they interact.
• Understanding why it is important for an organisation to continually review their processes and procedures.
• Obtaining, checking and using the appropriate documentation (such as job instructions, drawings quality control documentation)
• Working safely at all times, complying with health, safety and environmental legislation, regulations and organisational requirements planning and where applicable obtaining all the resources required to undertake the work activity.
• Undertaking the working activity correctly using the correct processes, procedures and equipment
• Carrying out the required checks (such as quality, compliance or testing) using the correct procedures, processes and/or equipment
• Dealing promptly and effectively with engineering/manufacturing problems within the limits of your responsibility using approved diagnostic methods and techniques and report those which cannot be resolved to the appropriate personnel
• Completing and required documentation using the defines recording system at the appropriate stages of the work activity
• Restoring the work area on completion of the activity and where applicable return any resources and consumables to the appropriate location.
• Personal responsibility, resilience and ethics – comply with health and safety guidance and procedures, be disciplined and have a responsible approach to risk, work diligently at all times, accept responsibility for managing time and workload and stay motivated and committed when facing challenges. Comply with any organisational policies/codes of conduct in relation to ethical compliance.
• Work effectively in team – integrate with the team, support other people, consider implications of your action on other people and the business
• Effective communication and interpersonal skills – open and honest communicator, communicating clearly using appropriate methods, listening to other and have a positive and respectful attitudes
• Focus on quality and problem solving – follow instructions and guidance, demonstrating attention to detail, follow a logical approach to problem solving and seek opportunities to improve quality, speed and efficiency
• Continuous personal development – reflect on skills, knowledge and behaviours and seek opportunities to develop, adapt to different situations, environments or technologies and have a positive attitude to feedback and advice.
You will also be required to learn specific skills and knowledge that are related to Mechtronics Maintenance Apprentices.
• Understand mathematical techniques, formula and calculations in a mechatronics maintenance environment and the type of equipment being maintained
• Understand mechanical, electrical, electronic, fluid power and process control principles in a mechatronics maintenance environment
• Understand how equipment being maintained functions and operating parameters in individual components and how they interact
• Understand fault diagnostic methods, techniques and equipment used when maintaining equipment and systems
• Understand condition monitoring methods and equipment used and understand how the information gained supports the planning of maintenance activities
• Understand how to minimise machinery downtime by implementing planned preventative maintenance programmes.
• Read and interpret data and documentation used to maintain components, equipment and systems
• Carry out condition monitoring of plant and equipment
• Carry out planned maintenance activities on plant equipment
• Carry out complex fault diagnosis and repair activities on high technology engineered systems such as: Maintaining mechanical equipment; Maintaining fluid & pneumatic power equipment; Maintaining electrical & electronic equipment; Maintaining process control equipment
• Carry out configuration testing and subsequent smooth hand over of equipment & plant support the installation, testing and commissioning of equipment (where applicable)
• Contribute to the business by identifying possible opportunities for improving working practices, processes and/or procedures
Apprentices can follow two separate pathways; Mechanical Bias or Electrical Bias from year 2 depending on your role and desired specialist outcome.
Apprentices are expected to attend college for 3 Days a week in Yr 1 / 2 Days a week in Yr 2 / 1 Day a week in Yr 3 as part of 20% off–the–job training. Additional off–the–job training hours are expected to be completed within the workplace, however you may be asked to complete tasks at home via Google Classroom and One–file.
Please note you may also be asked to complete additional English and Maths qualifications as part of the Apprenticeship programme.
How is the course assessed
Apprentices will be assessed on the skills, knowledge and behaviours required for the Engineering Technician Standard. All Apprentices will be required to achieve the following qualifications:
• Level 2 Diploma in Advanced Manufacturing Engineering (Foundation Competence)
• Level 2 Award for Foundation Phase Gateway Assessment
• Level 3 Diploma in Advanced Manufacturing Engineering (Development Competence) – Mechatronics Maintenance Technician
• Level 3 Diploma in Advanced Manufacturing Engineering (Development Knowledge)
You will also be assessed throughout your Apprenticeship by the course tutors whilst at college and have a skills Assessor available through the length of the Apprenticeship to guide and support you. You will have to submit coursework and assignments for the work covered at college and also provide evidence of the work you are doing in the workplace to bring you up to the correct level of competency to enable you to be put forward for the end–point assessment.
What can this course lead to
Completion of the Apprenticeship is designed to be recognised by relevant Professional Engineering Institutions at the appropriate level of professional registration (EngTech).
You may choose to progress onto a Higher/Degree Level Apprenticeships, full time learning programme or a range of further employment opportunities.
Are there any additional costs
Learners may need to purchase a uniform and/or equipment depending on the employer.
As a Mechatronic Maintenance Apprentice you may be expected to do shift work in challenging environments both inside and outside. Your environment can be noisy, dirty and sometimes cold – Standard tasks for Apprentices in the first 6 months of the Apprenticeship will include filter changes and filling up oil. You could be expected to work late night and weekends to accommodate business needs. An Apprentice will work on average 37 hours a week however this may vary throughout the year dependent on seasonal trends and workloads. Engineering Apprentice average salary varies between £12,000 and £28,000 a year depending on skills and experience. The course is a combination of academic knowledge – you will be working to A–Level standard for Maths and Science, and valuable hands on experience. If you are considering a pathway to university this course would be a suitable stepping stone however it would also allow you to build your understanding from the shop floor which is invaluable for many employers.
As an employed status Apprentice you will:
• Earn a wage – the national minimum wage for Apprentices is £4.15 an hour, although many Apprentices earn more than this. Please note you must be a paid employee of the business, you cannot be self–employed or a volunteer.
• Have a contract of employment – this must be given to you at the start of your employment.
• Get paid holidays – these will be detailed in your contract of employment.
• Receive training – it is crucial to the success of your Apprenticeship that your employer supports you with regular training. The Apprenticeship standard states you must complete a minimum of 20% off–the–job training which can also include training at Peterborough Regional College and training within the workplace. You will also be expected to build a portfolio and complete tasks on One–file and Google Classrooms.